Questions? Call us on (03) 9762-2220

Car Wash Systems

AUTO VALET® FOAM CAR WASH SYSTEM AND COIN OPERATED CAR WASH SYSTEMS

THANK YOU SO MUCH FOR YOUR VERY DURABLE AND EFFECTIVE AUTO VALET SYSTEM…

“TO ALL THE CREW AT JETBLASTER,

ch1

“OUR CUSTOMERS ARE ALL VERY HAPPY WITH HOW WELL THE AUTO VALET WORKS, WELL DONE!” VG TASMANIA

Capitalize on that unused space in your garage or service station; create a new car wash business or expand your existing one with an Auto Valet® or one of our coin operated car wash systems.

With the number of cars on our roads increasing each year and water restrictions fluctuating – self serve car washes are in great demand.

Jetblaster manufactured the first Auto Valet® in the early 1970s.  These were produced in the thousands and sold throughout Australia; many of these original units are still in operation today.  The original model proved so reliable and long lasting (HPW3ET) that we still manufacture it today.

As the years went by the demand for coin-operated car washes increased and new models were designed and produced.

The Auto Valet® car wash systems remain simple to maintain and operate, reliable and long lasting.

The Auto Valet® Foam Wash offers unique advantages over drive-through car washes – the customer can clean under the wheel arches, the engine, in door jams and in places where brush and laser washers can’t get to.  It puts the customer in control, making sure the job is done as desired.

Self-serve car washes also mean less expense to the customer, more profit to the owner.

This machine comes in HOT or COLD. Cold requires only a 10 amp power supply as opposed to a 32 amp supply (and can be special ordered in single phase – for those companies and sites where 3 phase power is not available).

SPECIFICATIONS

  • Operation selection – Off, Prewash, Foam Wash, Pressure Wash, Rinse, Wax
  • Coin or Token Operation – Electronic coin timer, fully adjustable with TIME REMAINING display
  • Pressure Pump – 1500PSI using triplex ceramic plungers – water consumption 9 L/min
  • Belt driven motor – 2.2kw (3HP) 415V 3 PHASE, 1450rpm
  • Pulsatron chemical pump for foam wash – Compressed air generated high density foam using mains pressure water and detergent.
  • Connection and Site requirements:
  • Power 415v 3 phase 30 AMP supply (5 pin plug) or 240v 10amp single phase – cold water
  • Water – normal ½” water supply (water volume minimum 15 lpm)
  • Air Compressed at 30 PSI min
  • Easy to understand operating instructions
  • Non scratch foaming brush
  • High pressure steel braided hose with swivel coupling at hand wand.

DIMENSIONS

  • Dimensions – cabinet H1820mm, W900mm, D570mm.
  • Boom height 3000mm Reach – 2580mm

INCLUDES

  • Twin swivel booms, one for a pressure spray gun, the other for the foam brush
  • 2 x 5mtr hoses
  • Gun with swivel lance 700mm S/S
  • Hogs hair brush and wand
  • 1 x 5ltr wash
  • 1 x 1ltr wax/polish
  • Inbuilt chemical tanks
  • Auto dosage unit

FOAM WASH INBUILT

This model is designed for single and multiple bay car washes. It is a compact foam wash unit mounted in a plant room, with a flush or wall mounted control box facing the wash bay(s). Stainless steel booms are mounted on the wall of the wash bay or in the roof or structure.
Industry applications
Specifications

  • Operation selection – Off, Prewash, Foam Wash, Hot Pressure Wash, Rinse, Wax
  • Coin or token operation – electronic coin timer fully adjustable with TIME REMAINING DISPLAY
  • Pressure Pump – 1500PSI using triplex ceramic plungers – water consumption 9 liters per min.
  • Belt driven motor – 2.2kw (3HP) 415V 3 Phase, 1450rpm.
  • Heater – instantaneous electric heater used on HOT wash cycle only 17.5kw. Unique design developed by Jetblaster®. Element sheathed with highly corrosion-resistant metal. Water is only heated on the wash cycle, eliminating wasted heat, storage losses and heat up delay.
  • Pulsatron chemical pump for foam wash – compressed air generated high density foam using mains pressure water and detergent.
  • Connection and site requirments: Power 415v 3 Phase 50HZ 32 AMP supply (5 pin plug), water – normal ½ inch water supply (water volume minimum 15lpm), air compressed at 30PSI min.
  • Easy to understand operating instructions
  • Non-scratch foaming brush
  • High pressure steel braided hose with swivel coupling at hand want.
  • Max temp on HOT 40 TO 45 degrees celcius

Accessories

  • Twin swivel booms, one for a pressure spray gun, the other for the foam brush
  • 2 x 5 meter hoses
  • Gun with swivel lance 700mm S/S
  • Hogs hair brush and wand
  • 1 x 5 litre wash
  • 1 x 1 litre wax/polish
  • Inbuilt chemical tanks
  • Auto dosage unit

HPW3ET AUTO VALET

ch2

Here is the original coin operated car wash that hit the market in the 1970s. This was the most successful single unit on the market for many years and it is still in use and in demand today.

This is the “roll-out”, compact car wash for the garage or workshop that doesn’t have the room for a complete car wash system.

This Auto Valet® comes complete and ready to use. You just need to plug it in, connect the water, fit on the boom, fill the chemical and away you go. At the end of the day you wheel the unit back into the workshop.

The HPW3ET Auto Valet® is a very simple and economical hot wash.

Specifications

  • Pressure 1500 PSI
  • Water volume 9lpm
  • Interpump 3 piston pump
  • Max temp on HOT 40-55 degrees celsius
  • Belt driven 2.2kw motor
  • Power 415v, 32 amps, 4 pin plug
  • $1 or $2 coin acceptor
  • Cabinet powder coated steel

Accessories

  • 1 x 10mtr hose
  • Gun with swivel
  • 700ml S/S lance
  • Single boom mounted to unit
  • Chemical tank inbuilt – detergent
  • Wax/polish for wax function
  • 1 x 5 litre detergent
  • 1 x 1 litre wax/polish

HPW3ET AUTO VALET® INBUILT

ch3

This is a compact version of the original auto valet. It is ideal for those garages or companies that don’t have the room to have a whole system in the wash bay or for those just wanting the control panel visible and the rest of the machine out of “harms’ way”. With the Auto Valet® inbuilt version only the control panel, selection switch, boom and coin acceptor are visible (flush mounted), with the rest of the unit hidden away behind a wall.

Specifications

  • Pressure 1500PSI
  • Water volume 9lpm
  • Interpump 3 piston pump
  • Max temp on HOT 40-45 degrees celcius
  • Belt driven 2.2kw motor
  • Power 415v 32 amps 4 pin plug
  • $1 or $2 coin acceptor
  • Cabinet powder coated steel
  • Stainless steel flush mounted control panel

Accessories

  • 1 x 10 meter hose
  • Gun with swivel
  • 700ml S/S lance
  • Powder-coated steel single boom (to be mounted on wall)
  • Chemical tank inbuilt – detergent
  • Wax/polish for was function
  • 1 x 5ltr detergent
  • 1 x 1ltr wax/polish